Stinkin' Cute Wine Cork Reindeer DIY

Here is an oldie from 2012, but it's a goodie and one of my top Pins on Pinterest ever. 

They've even been featured in an annual Sainsbury's Christmas flyer in England!

Look! A tiny reindeer made from wine corks and twigs for your Holiday decor!

If you accumulate a lot of wine corks or keep running across them at yard sales and thrift stores, here's a nifty little project for the holidays that is so stinkin' cute and sort of easy, plus cheap. I make these little guys to go with my Santa dolls and while making them today I went ahead and took pictures of the process.

Here he is surrounded by the supplies for his creation. Wine corks, little twigs (some with forks) and round headed pins. You will also need a tool for cutting like a razor craft knife and wire cutters.

Punch four leg holes at a slight outward angle in the bottom of one cork for the twig legs. Use a nail or ice pick or whatever gives you the right size holes. The holes need only be about 1/4" deep. Cut four sorta matching twigs for the legs, about 2" long, using a razor knife or wire cutters like those shown.

Put a bit of hot glue in the hole or on the twigs and insert the twigs into the holes. You can press the sticks in with gentle pressure against your work surface or use a pair of pliers. Stand the body up and if any leg is out of whack trim it JUST A LITTLE with a knife or the wire cutters. If you take off too much you'll have to trim the other legs and then the first leg again and it will only end in tears, trust me on this.

BUT, if this happens you can use a heat gun or blow dryer to soften the glue and remove the sticks so you can start over with 4 new twig legs.

If your chosen head cork is too large, trim one end straight off with a razor knife til the proportion seems right. Do the same same punch-holes-trim-twigs-glue-in-holes for the tiny forked antlers and the neck twig. Notice the neck twig is angled, so punch your holes with that in mind.

Look! Teeny tiny super cute wine cork reindeer!

LOVE these little guys!

But wait, what are the push pins for? This little guy needs a red nose, of course. I snipped the pin off short then painted the ball bright red.

Then I added a bit of tiny green tinsel around his neck. Perfect. You can add more tiny trims like the bow on his brother in the top pic, or a tiny star, or a little bell.

How cute would these be on your mantel or even marching across your desktop at work?  And with just a bit of twine or fishing line in a loop and hot glued to his back, you have a cute tree ornament. They are not strong enough to be used as toys but for your Christmas decor, what could be easier or cuter? And now you have a nifty project to use all those wine corks you have in that glass jar!

Try it, you'll like it and be sure to enjoy yourself. Every time I make one of these little guys they make me smile. You will smile, too!